(Optional) Configuring PPPoE Server Parameters

PPPoE server parameters can be configured as needed for negotiation between a PPPoE server and client.

Context

PPPoE uses the client/server model. A PPPoE client initiates a connection request to a PPPoE server. After a session is established, the PPPoE server provides access control and authentication for the PPPoE client. To help clients identify PPPoE servers, configure a name, service name, and service name matching mode for each PPPoE server. To allow successful PPPoE negotiation between Huawei and non-Huawei devices, configure conditions for sending PADM or PADN packets and a delimiter between MOTM items.

Procedure

Run system-view
The system view is displayed.
Run interface virtual-template virtual-template-number
A VT is created and its view is displayed, or the view of an existing VT is displayed.
Run pppoe-server ac-name ac-name
A name is configured for the PPPoE server.
Run pppoe-server service-name-parameter service-name-parameter
A service name is configured for the PPPoE server.
Run pppoe-server service-name-type exact-match
A service name matching mode is configured.
Run pppoe-server send { padm | padn } [ ipcp | ip6cp | { first | last | all } ncp ]
Conditions for sending PADM or PADN packets are configured.
Run pppoe-server motm item delimiter delimiter
A delimiter between MOTM items is configured.
Run quit
Return to the system view.
Run pppoe-server send padt always
Delayed PADT packet transmission is enabled.
Run commit
The configuration is committed.