(Optional) Changing the Ethernet Encapsulation Type of the Outer Tag

When Huawei and non-Huawei devices are connected and QinQ is configured, devices of various vendors set the inner TPID to 0x8100 and set the outer TPID to different values. To allow Huawei and non-Huawei devices to communicate, the Ethernet encapsulation type of the outer tag need be configured.

Context

Perform the following steps on a device on which QinQ tunneling is to be configured:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The view of the Ethernet interface on which the QinQ tunnel function is to be configured is displayed.

  3. Run qinq protocol ethertype-value

    The EtherType value in the outer VLAN tag is configured.

Parent Topic: Configuring the QinQ Function
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >