Defining a Traffic Behavior and Configuring Traffic Policing Actions

Procedure

1. Run system-view

   The system view is displayed.

2. Run traffic behavior behavior-name

   A traffic behavior is configured and the traffic behavior view is displayed.

3. Run car { cir cir-value [ pir pir-value ] } [ cbs cbs-value [ pbs pbs-value ] ] [ adjust adjust-value ] [ green { discard | pass [ remark dscp dscp | service-class class color color ] } | yellow { discard | pass [ remark dscp dscp | service-class class color color ] } | red { discard | pass [ remark dscp dscp | service-class class color color ] } ] ^* [ summary ] [ color-aware ] [ limit-type pps ]

   A traffic policing action is configured.

   

   After CAR is configured and applied, you can run the display traffic policy statistics interface command to view CAR statistics.

   In Step 3, choose parameters according to your requirement:

   • To configure traffic policing with a single token bucket, select cir and cbs, and set the value of pbs to 0.

   • To configure traffic policing with double token buckets, select cir, cbs, and pbs.

   • To configure traffic policing with dual rates and dual token buckets, select cir, pir, cbs, and pbs.

   • The cir and pir are expressed in kbit/s, the cbs and pbs are expressed in bytes.

4. Run commit

   The configuration is committed.