After class-based QoS is successfully configured, you can view the traffic classifiers, traffic behaviors, binding between traffic classifiers and behaviors in a specified traffic policy, and the configurations and running status of traffic policies and queues.
Procedure
- Run the display interface [ interface-type [ interface-number ] ] command to check information about the traffic on the interface.
- Run the display traffic behavior { system-defined | user-defined } [ behavior-name ] command to check information about the configured traffic behaviors.
- Run the display traffic classifier { system-defined | user-defined } [ classifier-name ] command to check information about the configured traffic classifiers.
- Run the display traffic policy { system-defined | user-defined } [ policy-name [ classifier classifier-name ] ] command to check information about the association between all or the specified traffic classifiers and traffic behaviors in traffic policies.
- Run the display traffic policy statistics interface interface-type interface-number [ .sub-interface ] { inbound | outbound } [ verbose { classifier-based [ class class-name ] | rule-based [ class class-name ] [ filter ] } ] command to check traffic statistics about the traffic policies configured on an interface.
- Run the display flow-car statistics { source-ip | destination-ip } [ ip-address ] slot slot-id { inbound | outbound } command to check flow CAR statistics about direction-specific traffic in a specified slot based on the source or destination IP address.
- Run the display traffic policy vpn-instance brief command to check the binding between VPN instances and traffic policies.