(Optional) Enabling the IPv6 QoS Local ID Matching Mode

If a matching rule based on the IPv6 QoS policy ID is defined, the rule can take effect only after the IPv6 QoS local ID matching mode is enabled.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run traffic policy policy-name

    A traffic policy is configured, and the traffic policy view is displayed.

  3. Run match-type ipv6 qos-local-id enable

    The IPv6 QoS local ID matching mode is enabled.

  4. Run commit

    The configuration is committed.

Parent Topic: Configuring MF Classification-based Traffic Policies for IP Packets
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >