Defining a Traffic Classifier

Before configuring class-based QoS for the traffic on the network, you need to define a traffic classifier.

Run system-view
The system view is displayed.
Run traffic classifier classifier-name [ operator { and | or } ]
A traffic classifier is defined and the traffic classifier view is displayed.

When a traffic classifier is defined for UCL, the logical relationship "and" between matching rules does not take effect.
Run if-match [ ipv6 ] acl acl-number [ precedence precedence-value ]
A UCL-based complex traffic classification rule is configured.

In this configuration, the value of acl-number ranges from 6000 to 9999.

To configure multiple UCL-based complex traffic classification rules, you can repeat this step.
Run commit
The configuration is committed.