Configuring the Last-Mile QoS Mode and Setting the Adjustment Value of the Size of Remote Packets

The device can adjust the link bandwidth based on the types of links between the user and DSLAM.

Context

The NetEngine 8000 F can implement last-mile QoS on two types of links.

Therefore, it selects the mode of last-mile QoS according to the type of the links on the two ends of the DSLAM If the user access mode is PPPoE, the mode of last-mile QoS should be frame.

The NetEngine 8000 F supports the configuration of the remote packet compensation value in both the interface view and the AAA domain view. The configuration in the AAA domain view takes effect for only the L2TP service.

Perform the following steps on the router:

Procedure

Configuring the last-mile QoS mode and setting the adjustment value of the size of remote packets in the interface view
1. Run system-view
  The system view is displayed.
2. Run interface interface-type interface-number
  The interface view is displayed.
3. Run qos link-adjustment shaping-mode { frame | cell }
  The last-mile QoS mode is configured.
4. Run qos link-adjustment adjust-value remote
  The adjustment value of the size of remote packets is set.
5. Run commit
  The configuration is committed.
Configuring the last-mile QoS mode and setting the adjustment value of the size of remote packets in the AAA domain view
1. Run system-view
  The system view is displayed.
2. Run aaa
  The AAA view is displayed.
3. Run domain domain-name
  The AAA domain view is displayed.
4. Run qos link-adjustment shaping-mode { frame | cell }
  The last-mile QoS mode is configured.
5. Run qos link-adjustment adjust-value remote
  The adjustment value of the size of remote packets is set.
  
  The configuration in the AAA domain view takes effect for only the L2TP service. If the adjustment value is configured in both the interface view and the AAA domain view, the configuration in the AAA domain view takes effect.
6. Run commit
  The configuration is committed.