Applying a QPPB Local Policy to an Interface

After a QPPB local policy is applied to an interface, the associated traffic behavior is performed for the packets that meet the matching rule.

You can apply a QPPB local policy to the incoming or outgoing traffic.

BGP routes in QPPB refer to only BGP routes on the public network. Private routes are involved in the QPPB application on the L3VPN.

Perform the following operations on a BGP route receiver:

Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
Run one of the following commands as needed:
- To apply a QPPB local policy to the incoming traffic, run the qppb-policy policy-name source inbound command on the inbound interface.
- To apply a QPPB local policy to the outgoing traffic, run the qppb-policy qos-local-id source inbound and qppb-policy policy-name outbound commands on the inbound and outbound interfaces respectively.
- To apply a QPPB local policy to the IP precedence, run the qppb-policy ip-precedence source command to apply QPPB policy for source address based on the traffic behavior specified by route policy.
The keyword source indicates that policies are applied to traffic along the route whose source address meets the matching rule.