Resetting Statistics on Port Queues
This section describes how to reset statistics on port queues.
Context
Statistics on port queues cannot be restored after being reset. Exercise caution when running reset commands.
To reset statistics on port queues on a specific interface, perform the following operation in the user view:
Procedure
- Run the reset port-queue statistics [ slot slot-id | interface { interface-name | interface-type interface-number } ] [ cos-value ] outbound command to reset statistics on port queues on a specific interface.
In VS mode, the parameter slot is supported only by the admin VS.
- Run the reset port-queue statistics slot slot-id [ cos-value ] outbound bind mtunnel command to clear the statistics about all or a specified queue on the MTunnel interface of the distributed multicast VPN.
In VS mode, this command is supported only by the admin VS.