Clearing Queue Statistics

This section describes how to clear statistics about a specified GQ, user queue or QoS profile statistics on a specified interface, and FQ statistics of a specified user.

Context

Queue statistics cannot be restored after being cleared. Exercise caution when performing this operation.

To clear queue statistics, run the corresponding reset command in the user view.

Procedure

Run the reset user-group-queue [ name ] group-name statistics [ group group-name ] slot { slot-id | all } { inbound | outbound } command to clear statistics about a specified GQ.
Run the reset qos-profile statistics interface { interface-name | interface-type interface-number } [ vlan vlan-id | pe-vid pe-vid ce-vid ce-vid | vid vid | ce-vid ce-vid | vid vid ce-vid ce-vid ] { inbound | outbound } command to clear QoS profile statistics on a specified interface.
Run the reset port-queue statistics interface { interface-name | interface-type interface-number } [ cos-value ] outbound or reset port-queue statistics [ slot slot-id ] [ cos-value ] outbound command to clear PQ statistics.
Run the reset qos user-id user-id { inbound | outbound } to clear statistics about eight priority queues and CAR traffic policing of a specified user.
In VS mode, this command is supported only by the admin VS.
Run the reset user-group-queue statistics interface { interface-name | interface-type interface-number } pe-vid pe-vid ce-vid ce-vid { inbound | outbound } command to clear GQ statistics on a specified interface.
Run the reset sub-port-queue statistics { interface-type interface-number | interface-name } outbound command to clear statistics about sub-interface queues.
Run the reset qos-profile statistics vni vni-id { inbound | outbound } command to clear QoS profile statistics of a specified VNI.
Run the reset qos-profile statistics vni vni-id { inbound | outbound } source sourceip peer peerip command to clear QoS profile statistics on a specified NVE interface.
Run the reset qos default flow-queue statistics interface { interface-name | interface-type interface-number } outbound command to clear FQ statistics on a specified channelized sub-interface.