Configuring Actions for PBR

Procedure

1. Run system-view

   The system view is displayed.

2. Run policy-based-route policy-name permit node node-id map-instance map-instance-id

   A policy or node is created, and the policy-based-route view is displayed.

   

   A maximum of 100 policies can be configured.

   A maximum of 200 nodes can be configured.

   The map-instance-id value must be the same as the node-id value.

3. Run if-match acl name acl-name

   An ACL is configured to match against IP addresses.

4. Run apply output-interface { interface-name | interface-type interface-number }

   The outbound interface to which packets are redirected is specified.

   

   The outbound interface can only be a P2P TE tunnel interface. If the tunnel type is changed, the configuration is deleted automatically for the PBR.

   The format of tunnel-name can be either of the following:

   • Tunnel interface-number. The format of interface-number is x/y/z.
   • Tunnel tunnel-number. The value of tunnel-number is an integer ranging from 0 to 4294967295.

5. Run commit

   The configuration is committed.