Verifying the Configuration of PBR Based on Redirection to an MPLS-TE P2P Tunnel

After configuring policy-based routing (PBR), check the configurations.

Prerequisites

The configurations of PBR are complete.

Procedure

  1. Run the display ip policy-based-route command to check enabled PBR policies.
  2. Run the display policy-based-route [ policy-name ] command to check the created policy content.
Parent Topic: PBR Based on Redirection to an MPLS-TE P2P Tunnel
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic