Configuring a Global Traffic Policy and Enabling Global QPPB

A global traffic policy must be configured for global QPPB implementation.

To implement global QPPB, configure a global traffic policy and configure QoS policy ID-based rules in the traffic classifier.

For detailed traffic policy configurations, see Class-based QoS Configuration.

This configuration is supported only on the Admin VS.

Define a traffic classifier based on Layer 3 or Layer 4 information.
1. Run system-view
  The system view is displayed.
2. Run traffic classifier classifier-name [ operator { and | or } ]
  A traffic classifier is defined, and the traffic classifier view is displayed.
3. Run if-match qos-local-id qos-local-id
  A source or destination QoS policy ID-based rule is configured in the traffic classifier.
4. Run if-match qos-local-id source source-local-id destination destination-local-id
  A source and destination QoS policy ID-based rule is configured in the traffic classifier.
5. Run commit
  The configuration is committed.
Define a traffic behavior and configure actions.
For details, see Defining a Traffic Behavior and Configuring Actions.
Define a traffic policy and configure traffic behaviors.
For details, see Defining a Policy and Specifying a Behavior for a Classifier in the Policy.
Run quit
Return to the system view.
Run traffic-policy policy-name { inbound | outbound } global-acl
A global traffic policy is configured.
Run qppb qos-local-id { source | destination | both inbound }
Global QPPB is enabled.
Run commit
The configuration is committed.