If only an SRv6 port license rather than a device-based license is purchased, you can configure SRv6 services only after activating the SRv6 port license.
Before you configure SRv6 services, run the active port-srv6 command to activate SRv6 licenses in batches.
The system view is displayed.
The license view is displayed.
The SRv6 port license is activated for a specified board.
The configuration is committed.
Run the display license resource usage port-srv6 { all | slot slotid } [ active | deactive ] command to check whether the SRv6 port license has been activated for the board.