(Optional) Configuring CBTS

Service class can be set for packets that MPLS TE tunnels allow to pass through.

Context

When services recurse to multiple TE tunnels, the mpls te service-class command is run on the TE tunnel interface to set a service class so that a TE tunnel transmits services of a specified service class.

Procedure

Run system-view
The system view is displayed.
Run interface tunnel tunnel-number
The MPLS TE tunnel interface view is displayed.
Run mpls te service-class { service-class & <1-8> | default }
A service class is set for packets that an MPLS TE tunnel allows to pass through.
- This command is used only on the ingress of an MPLS TE tunnel.
- If the mpls te service-class command is run repeatedly on a tunnel interface, the latest configuration overrides the previous one.
Run commit
The configuration is committed.