Configuring Traffic Suppression on a Sub-Interface

Procedure

1. Run system-view

   The system view is displayed.

2. Run vsi vsi-name [ static ]

   A VSI is created.

3. Run suppression { inbound | outbound } enable

   Traffic suppression is enabled in the VSI.

4. Run pwsignal ldp

   A signaling protocol is configured for the VSI.

5. Run vsi-id vsi-id

   An ID is configured for the VSI.

6. Run quit

   Return to the VSI view.

7. Run quit

   Return to the system view.

8. Run interface interface-type interface-number.subinterface-number

   The sub-interface view is displayed.

9. Run vlan-type dot1q vlan-id

   The sub-interface is associated with a VLAN, and the VLAN encapsulation mode for the sub-interface is configured.

10. Run l2 binding vsi vsi-name [ access-port ]

    The sub-interface is bound to the VSI.

11. Run broadcast-suppression cir cir-value [ cbs cbs-value ] { inbound | outbound }

    Broadcast traffic suppression is configured on the sub-interface.

12. Run multicast-suppression cir cir-value [ cbs cbs-value ] { inbound | outbound }

    Multicast traffic suppression is configured on the sub-interface.

13. Run unknown-unicast-suppression cir cir-value [ cbs cbs-value ] { inbound | outbound }

    Unknown unicast traffic suppression is configured on the sub-interface.

14. Run commit

    The configuration is committed.