Maintaining URPF

Before you start collecting statistics about URPF, clear the existing statistics.

Procedure

  1. Run the reset { ip | ipv6 } urpf discard statistics interface { interface-type interface-number | all } command to clear the statistics on the packets that fail the URPF check and are discarded on an interface.
  2. Run the reset { ip | ipv6 } urpf discard statistics [ slot slot-id ] command to the statistics on the packets that fail the URPF check and are discarded on an interface board.
Parent Topic: URPF Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >