Configuring Interface Isolation for an Outer VLAN in VLAN Stacking or a Service Provider VLAN in VLAN Mapping

This section describes how to configure interface isolation for an outer VLAN in VLAN stacking or a service provider VLAN in VLAN mapping.

Context

Perform the following steps on the device on which the interfaces to be isolated reside:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface { ethernet |gigabitethernet | eth-trunk } interface-number

    The interface view is displayed.

  3. Run portswitch

    The interface is configured as a switched interface.

  4. Run outside-vlan port isolate

    Interface isolation is enabled.

Parent Topic: Configuring Intra-VLAN Interface Isolation
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >