(Optional) Configuring the Source Interface of the RADIUS Server Group

When the NetEngine 8000 F connects to multiple RADIUS servers, you can configure the source interface of each RADIUS server on the NetEngine 8000 F to identify the route between the NetEngine 8000 F and each RADIUS server.

Context

On the NetEngine 8000 F, you can configure the interface that connects to a RADIUS server as the source interface of the RADIUS server. On the NetEngine 8000 F, you can configure the source interface in the system view or in the view of a RADIUS server group. Therefore, the RADIUS servers in the RADIUS server group use this source interface to interact with the NetEngine 8000 F. If the source interface of the RADIUS server group is not configured, the RADIUS servers use the global source interface.

Procedure

Configure the global source interface of all RADIUS servers in all RADIUS server groups.
1. Run system-view
  The system view is displayed.
2. Run radius-server source interface interface-type interface-number
  The global source interface of all the RADIUS servers is configured.
3. Run commit
  The configuration is committed.
Configure the source interface of a specified RADIUS server group.
1. Run system-view
  The system view is displayed.
2. Run radius-server group group-name
  The RADIUS server group view is displayed.
3. Run radius-server source interface interface-type interface-number
  The source interface of RADIUS servers in the RADIUS server group is configured.
4. Run commit
  The configuration is committed.