| Item | Value |
|---|---|
| Basic Information | |
| Module name | 100Gbps(4*25.7)-QSFP28-SMF-1310nm-30km(NO FEC)-40km(FEC)-commercial |
| Part Number | 02312AUE |
| Model | OSN030N05 |
| Form factor | QSFP28 |
| Application standard | IEEE 802, 3ba, 100GBASE-ER4 |
| Connector type | LC |
| Optical fiber type | SMF |
| Bit error ratio (BER) | <5x10E-5 |
| Working case temperature [°C(°F)] | 0°C to 70°C(32°F to 158°F) |
| DDM options | SFF-8636 |
| Environment standard | RoHS |
| Security standard | FCC Class B, IEC 60825-1 Class 1 |
| ESD(HBM1) [V] | 500 V |
| Transmission rate [bit/s] | 103.125 Gbit/s |
| Target transmission distance [km] | 40 km(FEC) 30 km(NO FEC) |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1295.56 nm 1300.05 nm 1304.58 nm 1309.14 nm |
| Tx operating wavelength range [nm] | 1294.53 nm - 1296.59 nm 1299.02 nm - 1301.09 nm 1303.54 nm - 1305.63 nm 1308.09 nm - 1310.19 nm |
| Maximum Tx optical power (AVG) [dBm] | per lane: 2.9 dBm |
| Maximum Tx optical power (OMA) [dBm] | per lane: 4.5 dBm |
| Minimum Tx optical power (AVG) [dBm] | per lane: -2.5 dBm |
| Minimum Tx optical power (OMA) [dBm] | per lane: 0.1 dBm |
| Minimum extinction ratio [dB] | 8 dB |
| Receiver Optical Characteristics | |
| Rx operating wavelength range [nm] | 1294.53 nm - 1296.59 nm 1299.02 nm - 1301.09 nm 1303.54 nm - 1305.63 nm 1308.09 nm - 1310.19 nm |
| Rx sensitivity (AVG) [dBm] | - |
| Rx sensitivity (OMA) [dBm] | per lane: -21.4 dBm |
| Overload power (AVG) [dBm] | per lane: -3.5 dBm |
| Overload power (OMA) [dBm] | - |
NOTE:
1. If the module needs to reach 40km, the board FEC function must be enabled, otherwise 30km. 2. The BER 5x10E - 5 is the data that is not enabled by FEC, so that 1x10E - 12 can be reached after FEC . 3. As a 30km application, the BER can reach 1x10E - 12 4. The optical power calculation is based on the OMA value. The optical power read by the device is the average optical power, not the OMA optical power. |
|