| Item | Value |
|---|---|
| Basic Information | |
| Module name | 100Gbps(4*25.7)-QSFP28-MMF-850nm-0.1km-commercial |
| Part Number | 02311NTY |
| Model | OMND10N13 |
| Form factor | QSFP28 |
| Application standard | IEEE 802, 3bm, 100GBASE-SR4 |
| Connector type | MPO-12 |
| Optical fiber type | MMF |
| Bit error ratio (BER) | <5x10E-5 |
| Working case temperature [°C(°F)] | 0°C to 70°C(32°F to 158°F) |
| DDM options | SFF-8636 |
| Environment standard | RoHS |
| Security standard | FCC Class B, IEC 60825-1 Class 1 |
| ESD(HBM1) [V] | 500 V |
| Transmission rate [bit/s] | 103.125 Gbit/s |
| Target transmission distance [km] | 0.07 km(OM3) 0.1 km(OM4) |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Tx operating wavelength range [nm] | 840 nm - 860 nm |
| Maximum Tx optical power (AVG) [dBm] | per lane: 2.4 dBm |
| Maximum Tx optical power (OMA) [dBm] | per lane: 3 dBm |
| Minimum Tx optical power (AVG) [dBm] | per lane: -8.4 dBm |
| Minimum Tx optical power (OMA) [dBm] | per lane: -8.4 dBm |
| Minimum extinction ratio [dB] | 2 dB |
| Receiver Optical Characteristics | |
| Rx operating wavelength range [nm] | 840 nm - 860 nm |
| Rx sensitivity (AVG) [dBm] | - |
| Rx sensitivity (OMA) [dBm] | per lane: -10.3 dBm |
| Overload power (AVG) [dBm] | per lane: 2.4 dBm |
| Overload power (OMA) [dBm] | - |
NOTE:
1. If the module needs to reach the nominal data, the board FEC function must be enabled. 2. The BER 5x10E - 5 is the data that is not enabled by FEC, so that 1x10E - 12 can be reached after FEC . 3. The optical power calculation is based on the OMA value. The optical power read by the device is the average optical power, not the OMA optical power. |
|