Feature Requirements |
Series |
Models |
|---|---|---|
Only one user is allowed to run an upgrade command at the same time. The system displays a message if another upgrade command is delivered during the upgrade of board firmware. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
There is a low probability that the e-label cannot be manually installed.Run the command to install the e-label again after the failure. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
An alarm is reported before the device restarts. After the configuration is cleared and the device restarts, some parameters (such as the interface name) in the alarm log cannot be correctly displayed. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |