Feature Requirements |
Series |
Models |
|---|---|---|
Mirroring is not supported for the traffic of users accessed from VE interfaces. |
NetEngine 8000 F |
NetEngine 8000 F1A |
The main interface's configuration about packet label removing also applies to its sub-interfaces, regardless of whether the main interface and the sub-interfaces are in the same independent VS. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
After port mirroring is configured on a main interface, the port mirroring configuration becomes ineffective on its sub-interface, regardless of whether the main interface and its sub-interface belong to the same independent VS. Please plan service processing boards properly. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
When you use the mirroring function to mirror protocol packets, you cannot enable the protocol on the corresponding observing port. Otherwise, the protocol connection fails to be established, which may cause interface flapping. Properly plan services. If protocol packets need to be mirrored, do not enable the protocol on the observing port. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |