Feature Requirements |
Series |
Models |
|---|---|---|
OSPFv3 checks whether a neighbor in the full state exists in the backbone area before advertising a default route to the stub area. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
If the OSPFv3 dead timer is too short, OSPFv3 neighbor relationships may easily go down, interrupting services. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
If the OSPFv3 dead timer is too short, OSPFv3 neighbor relationships may easily go Down, interrupting services. Use the default Hello timer and dead timer. AlterNonetively, set a value that is no less than 40s for the dead timer. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
After the device is restarted, if the BFD session of the local device or its neighbor is in Admin Down state, the OSPFv3 status is not affected. When the BFD session is renegotiated, if the BFD detection status reported by BFD is Down (used to be Up), the OSPFv3 neighbor is set to Down. In other cases, the OSPFv3 status is not affected. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |