Feature Requirements |
Series |
Models |
|---|---|---|
SNMPv1 does not support the GetBulk operation. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
SNMPv3 is recommended because it offers greater security than SNMPv1 and SNMPv2c. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
The port number and authentication parameter settings on the NMS must be the same as those on the device, and the SNMP version used on the NMS must be enabled on the device. If either of these conditions is not met, the NMS cannot manage the device. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
Each independent management VS allows the private VB function to be enabled on a maximum of three target hosts. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
When the SNMP get-next/get-bulk operation is performed to query data in the cache, the default aging period is 5 seconds. Although the data in the cache may have been deleted from the database or APP or encounters a value change during the aging period, SNMP cannot detect this situation and still returns the data in the cache to the NMS. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
If more than 512 IP+VPN pairs exist in the SNMP IP address locking list, the device stops processing SNMP packets. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |