Feature Requirements |
Series |
Models |
|---|---|---|
When the tunnel binding command is used to specify a TE tunnel, the mpls te reserved-for-binding command needs to be run on the specified TE tunnel interface. When the tunnel select-seq command is run to select a TE tunnel, the mpls te reserved-for-binding command cannot be used on the specified TE tunnel interface. According to service deployment, the mpls te reserved-for-binding command on a TE interface must be used together with the tunnel policy in tunnel binding mode. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
If select-seq srpolicy is specified and select-seq is also configured for other types of tunnels when a tunnel policy is configured, the unmix option must be configured. That is, hybrid load balancing between SR-MPLS TE Policies and other types of tunnels is not allowed. If the configured tunnel policy cannot recurse routes to an SR-MPLS TE Policy (for example, due to color mismatch), other types of tunnels (such as TE and LDP tunnels) cannot be used together for load balancing. However, load balancing can performed based on the load-balance-number configuration among tunnels of the same type. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |