Feature Requirements |
Series |
Models |
|---|---|---|
After the device is restarted, the VRRP priority is adjusted based on the BFD session state. If the BFD session goes down or the negotiation times out, the VRRP group adjusts its priority based on the Down state of the BFD session. If the BFD session state is Up or AdminDown, the VRRP group adjusts its priority based on the Up state of the BFD session. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
1. Dot1q sub-interfaces with the vlan-type dot1q vid dscp default command configured (the other dot1q sub-interfaces do not have the vlan-type dot1q vid dscp 48 command configured) can negotiate the master/backup VRRP status. 2. Dot1q interfaces with the vlan-type dot1q vid dscp 48 command configured can negotiate the master/backup VRRP status, but the other dot1q sub-interfaces cannot do so. 3. Dot1q interfaces with the vlan-type dot1q vid 8021p 6 command configured can negotiate the master/backup VRRP status, but the other dot1q sub-interfaces cannot do so. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |
When multiple sub-VLANs are configured in a super VLAN and a VRRP instance is configured on the super VLANIF interface, the number of VRRP groups that can be configured may not reach the expected upper limit. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |