Configuring an MPLS-based ACL
An MPLS-based ACL defines rules to filter packets.
Usage Scenario
As shown in Figure 1, an MPLS-based ACL is created for QoS services on Device D to allow Device D to allocate 54000 bit/s bandwidth to the MPLS packets with an EXP value smaller than 3 sent from Network A and to allocate 8000 bit/s bandwidth to the MPLS packets with an EXP value greater than 3 sent from Network B.
- Creating an MPLS-based ACL
- You can create an MPLS-based ACL and configure parameters for the ACL.
- Configuring an MPLS-based ACL Rule
- MPLS-based ACL rules are defined based on MPLS packets' EXP, label, or TTL values to filter packets.
- Applying an MPLS-based ACL
- MPLS-based ACLs can be used in QoS services.
- Verifying the Configuration of an MPLS-based ACL
- After configuring an MPLS-based ACL, verify the configuration.