Clearing ARP Security Statistics
This section describes how to clear Address Resolution Protocol (ARP) security statistics
Background Information
ARP security statistics cannot be restored after they are cleared. Exercise caution before clearing the statistics.
Procedure
- Run the reset arp packet statistics[ slot slot-id ] command in the user view to reset ARP statistics of a specified or all boards.
- Run the reset arp packet statistics interface [ interface-type interface-number ] command in the user view to reset ARP statistics of a specified or all Layer 3 interfaces.
- Run the reset arp-check { check-destination-ip | check-valid } statistics slot slot-id command in the user view to clear statistics about discarded invalid ARP packets on a specific interface board.
In VS mode, this command is supported only by the admin VS.