Configuring Physical Attributes for the Console User Interface

Physical attributes of the console user interface include the transmission rate, flow control mode, parity bit, stopbits, and databits for the console port.

Context

To log in to a router through a console port, you must ensure that physical attributes configured on the terminal emulation program for the console port are the same as those of the console user interface on the router.

This configuration process is supported only on the Admin-VS.

Procedure

Run system-view
The system view is displayed.
Run user-interface { ui-type | console first-ui-number }
The console user interface is displayed.
Run speed speed-value
A transmission rate is set.

The value can be 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200, in bit/s.
Run flow-control flowtype
A flow control mode is set.
Run parity paritytype
A parity bit is set.
Run stopbits stopbitvalue
Stopbits are set.
Run databits databitvalue
Data bits are set.
Run commit
The configuration is committed.