Verifying the Configuration of BFD to Monitor an IP Link
After configuring BFD to monitor an IP link, verify the configurations, including the minimum intervals at which BFD control packets are sent and received, WTR time, and description of a BFD session.
Prerequisites
BFD has been configured to monitor an IP link.
You can view statistics about a BFD session and information about the BFD session only after all BFD parameters are set and the BFD session is successfully set up.
Procedure
- Run the display bfd session { all | discriminator discr-value | dynamic | peer-ip peer-ip [ vpn-instance vpn-name ] | static } [ verbose ] command to check information about BFD sessions.
- Run the display bfd statistics command to check global BFD statistics.
- Run the display bfd statistics session { all | static | dynamic | discriminator discr-value | peer-ip peer-ip [ vpn-instance vpn-name ] } command to check statistics about BFD sessions.
- Run the display bfd interface command to check information about BFD interfaces.