Verifying the One-Arm BFD Echo Session Configuration
After configuring a one-arm BFD echo session, verify the configurations.
Prerequisites
A one-arm BFD echo session has been configured.
Information about a BFD session can be viewed only after parameters of the BFD session are set and the BFD session is established.
Procedure
- Run the display bfd session { all | discriminator discr-value | dynamic | peer-ip peer-ip [ vpn-instance vpn-name ] | static } [ verbose ] command to check BFD session information.
- Run the display bfd statistics command to check global BFD statistics.
- Run the display bfd statistics session { all | static | dynamic | discriminator discr-value | peer-ip peer-ip [ vpn-instance vpn-name ] } command to check BFD session statistics.
- Run the display bfd interface command to check information about BFD-enabled interfaces.