Verifying the Configuration of BFD for Link-Bundle Session to Detect Eth-Trunk Member Link Faults
After configuring a BFD for link-bundle session to detect Eth-Trunk member link faults, verify the configurations.
Prerequisites
A BFD for link-bundle session has been configured to detect Eth-Trunk member link faults.
Information about a BFD session can be viewed only after parameters of the BFD session are set and the BFD session is established.
Procedure
- Run the display bfd link-bundle session [ interface interface-type interface-number ] command to check information about BFD for link-bundle sessions.