Configuring BGP4+ to Import Default Routes

Procedure

1. Run system-view

   The system view is displayed.

2. Run bgp as-number

   The BGP view is displayed.

3. Run ipv6-family unicast

   The IPv6 unicast address family view is displayed.

4. Run default-route imported

   BGP4+ is configured to import default routes.

   To import default routes, run both the default-route imported command and the import-route command. If only the import-route command is used, default routes cannot be imported. In addition, the default-route imported command is used to import only the default routes that exist in the local routing table.

5. Run commit

   The configuration is committed.