After configuring BGP4+ routing policies, check routes that are advertised and received by BGP4+.
Prerequisites
The routing policies have been configured.
Procedure
- Run the display bgp ipv6 network command to check the routes imported by BGP4+ using the network command.
- Run the display bgp ipv6 routing-table as-path-filter { as-path-filter-number | as-path-filter-name } command to check the routes that match a specified AS_Path filter.
- Run the display bgp ipv6 routing-table community-filter { { community-filter-name | basic-community-filter-number } [ whole-match ] | advanced-community-filter-number } command to check the routes that match a specified BGP4+ community filter.
- Run the display ip extcommunity-filter [ basic-extcomm-filter-num | advanced-extcomm-filter-num | extcomm-filter-name ] command to check the VPN-Target extended community filter information.
- Run the display ip extcommunity-list soo [ extcomm-filter-name ] command to check SoO extended community filter information.
- Run the display bgp ipv6 routing-table peer ipv6-address { advertised-routes | received-routes } [ statistics ] command to view the routes advertised to or received from a specified BGP4+ peer.