Resetting BGP4+ Connections
Resetting BGP4+ connections interrupts peer relationships.
Context
BGP4+ peer relationships between routers are deleted if you reset BGP4+ connections using the reset bgp ipv6 command. Therefore, exercise caution when resetting such connections.
When a BGP4+ routing policy (the router does not support the router-fresh capability) is changed, reset BGP connections so that the new configuration can take effect. To reset BGP4+ connections, run any of the following commands in the user view:
Procedure
- Run the reset bgp ipv6 all command to reset all BGP4+ connections.
- Run the reset bgp ipv6 as-number command to reset a BGP4+ connection between two devices in different ASs.
- Run the reset bgp ipv6 { ipv4-address | ipv6-address } command in the user view to reset the BGP4+ connection with a specified peer.
- Run the reset bgp ipv6 external command in the user view to reset all external BGP4+ connections.
- Run the reset bgp ipv6 internal command in the user view to reset all internal BGP4+ connections.