Configuring an LDP LSP on an IPv4 Network

Procedure

1. Run system-view

   The system view is displayed.

2. Run mpls lsr-id lsr-id

   An LSR ID is configured.

3. Run mpls

   MPLS is enabled and the MPLS view is displayed.

4. (Optional) Run lsp-trigger { all | host | ip-prefix ip-prefix-name | none }

   An LSP triggering policy is configured.

   Currently, the NetEngine 8000 F automatically distributes labels to host routes with 32-bit masks. The command in this step needs to be run to distribute labels to routes of other types or specific routes.

5. Run quit

   Return to the system view.

6. Run mpls ldp

   LDP is enabled and the LDP view is displayed.

7. Run quit

   Return to the system view.

8. Run interface interface-type interface-number

   The view of the IPv4 network-side interface is displayed.

9. Run mpls

   MPLS is enabled on the interface.

10. Run mpls ldp

    LDP is enabled on the interface.

11. Run commit

    The configuration is committed.