Verifying the Configuration of BGP4+ 6PE

After configuring BGP4+ 6PE, check whether CEs can learn routes to each other.

Procedure

  1. Run the display bgp ipv6 peer command on each PE to check the status of the BGP4+ peer relationship.
  2. Run the display mpls ldp session [ vpn-instance vpn-instance-name ] [ verbose | peer-id ] command on each PE to check the status of the LDP session.
  3. Run the display bgp ipv6 routing-table ipv6-address prefix-length command on each PE or the display ipv6 routing-table ipv6-address prefix-length [ longer-match ] [ verbose ] command on each CE to check the routes destined for the remote IPv6 network.
Parent Topic: Configuring BGP4+ 6PE
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic