Verifying the Basic BGP Configuration

After configuring the basic BGP functions, verify BGP peer information.

Basic BGP functions have been configured.

Run the display bgp router-id [ vpn-instance [ vpn-instance-name ] ] command to check the router IDs.
Run the display bgp peer [ verbose ] command to check the information about all BGP peers.
Run the display bgp peer ipv4-address { log-info | verbose } command to check the information about a specified BGP peer.
Run the display bgp routing-table command to check the information about BGP routes.
Run the display bgp routing-table route-filter route-filter-name command to check BGP routes that match a specified route-filter.