Configuring MP-IBGP Between a PE and an ASBR in the Same AS

Procedure

1. Run system-view

   The system view is displayed.

2. Run bgp as-number

   The BGP view is displayed.

3. Run peer peer-address as-number as-number

   The IBGP peer relationship is set up between the PE and ASBR in the same AS.

4. Run peer peer-address connect-interface loopback interface-number

   The loopback interface is specified as the outbound interface of the BGP session.

5. Run ipv4-family vpnv4 [ unicast ]

   The BGP-VPNv4 address family view is displayed.

6. Run peer peer-address enable

   The function to exchange VPNv4 routes between the PE and ASBR is enabled.

7. Run peer { group-name | ipv4-address } label-route-capability

   The capability to exchange labeled IPv4 routes is configured.

8. Run commit

   The configuration is committed.