Verifying the Configuration of an Intra-AS NG MVPN

After configuring an intra-AS IPv6 NG MVPN, verify the BGP MVPN peer relationships, I-PMSI tunnels, and VPN instance PIM routing table information.

An intra-AS NG MVPN has been configured.

Run the display bgp mvpn all peer [ [ ipv4-address ] verbose ] command to check BGP MVPN peer configurations.
Run the display mvpn ipv6 vpn-instance vpn-instance-name ipmsi [ verbose [ grpAddr | srcAddr ] ^* ] command to check I-PMSI tunnel configurations of MVPN services in a specified VPN instance.
Run the display mvpn ipv6 { vpn-instance vpn-instance-name | all-instance } spmsi [ verbose [ grpAddr | srcAddr ] ^* ] command to check S-PMSI tunnel configurations of MVPN services in a specified VPN instance.
Run the display pim ipv6 { vpn-instance vpn-instance-name | all-instance } routing-table command to check PIM routing table configurations of a specified or all VPN instances.
Run either of the following commands to check multicast-LSP configurations.
- For mLDP P2MP LSPs, run the display mpls multicast-lsp protocol mldp p2mp [ root-ip root-ip-address { lsp-id lsp-id | opaque-value opaque-value } ] [ lsr-role { bud | ingress | transit | egress } ] command.
- For RSVP-TE P2MP LSPs, run the display mpls multicast-lsp protocol p2mp-te [ lsp-id ingress-lsr-id session-id p2mp-id lsp-id [ s2l-dest-addr ip-address ] ] command.