Some device commands may result in serious consequences if operations are not properly performed. To avoid misoperations, re-confirmation is required by default.
If you run some undo commands by mistake, configurations of related features are deleted, causing interruption of services or networks. To avoid misoperations, re-confirmation is required by default when running the following commands: undo mpls, undo mpls te, undo mpls rsvp, undo mpls ldp, undo mpls l2vpn, undo multicast ipv6 routing-enable, undo multicast routing-enable, undo pim, undo igmp, undo bfd, and undo stp enable.
You are advised to enable the function because misoperations will cause services to be unavailable.
The system view is displayed.
The re-confirmation function is disabled.
The configuration is committed.