Configuring the Session Log Function

By default, the global session log function is disabled, and the session log function of a single connection is enabled. You can perform the following steps to configure the session log function.

Context

The global session log function is disabled by default. You can enable the global session log function if you need to save the input, device screen output, and the time when the device executes commands to the session log file in the root directory.

The session log function of a single connection is enabled by default. After the global session log function is enabled, information such as the input and screen output of all connections on the device is recorded in the log file. If session logs do not need to be generated for some connections, you can run the terminal session-log disable command to disable the session log function for these connections.

Procedure

Enable the global session log function.
1. Run system-view
  The system view is displayed.
2. Run undo info-center session log disable
  The global session log function is enabled.
3. Run commit
  The configuration is committed.
Disable the session log function for the current connection.
Run display info-center session log status

The status of the global session log function and the status of the session log function of all online connections are displayed.
- If the global session log function is enabled, perform the following steps:
  1. Run the system-view command to enter the system view.
  2. Run the terminal session-log disable command to disable the session log function of the current connection.
  3. Run the commit command to commit the configuration.
- If the global session log function is disabled, no further action is required.

Checking the Configurations

Run the display info-center session log status command to view the status of the global session log function and the session log function of all online connections.