To improve DCN performance, configure OSPF functions.
The system view is displayed.
The interface view is displayed.
DCN is enabled on the interface
Run dcn ospf timer hellointerval
An interval at which hello packets are sent is configured.
Run dcn ospf timer retransmitinterval
An interval at which an LSA packet is retransmitted to the neighboring router is set.
Run dcn ospf trans-delayinterval
An LSA transmission delay is set on the interface.
Run dcn ospf timer deadinterval
The dead interval is set for a neighboring router.
If an interface does not receive Hello packets from an OSPF neighbor within the specified interval, the interface considers the neighbor Down. This interval is called an OSPF neighbor dead interval.
Run dcn ospf timer pollinterval
The interval at which hello packets for polling are sent by an NBMA interface is set.
The configuration is committed.