Configuring an Authentication Message for the Private TLV That Supports NMS Automatic NE Management in LLDP Packets

This section describes how to configure an authentication message for the private TLV that supports NMS automatic NE management in LLDP packets.

Usage Scenario

When NEs use sub-interfaces numbered 4094 for DCN communication, an NE on which NMS automatic NE management is configured encapsulates an authentication message in the private TLV that supports NMS automatic NE management in an LLDP packet before sending the LLDP packet to a downstream NE. Upon receipt of the LLDP packet, the downstream NE parses the private TLV if the downstream NE supports NMS automatic NE management. If the authentication message carried in the LLDP packet is the same as the one configured locally, NMS automatic NE management takes effect on the downstream NE. If the authentication message carried in the LLDP packet is different from the one configured locally, NMS automatic NE management does not take effect on the downstream NE.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run lldp enable-dcn authentication authentication-string

    An authentication message is configured for the private TLV that supports NMS automatic NE management in LLDP packets.

  3. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >