(Optional) Configuring Periodic EFM Errored Frame Detection

If the number of errored frames that an EFM-enabled interface detects within a configured detection period reaches or exceeds a configured threshold, the interface notifies its peer interface of the errored frame fault.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The view of the interface at one end of a link is displayed.

  3. Run efm error-frame-period notification enable

    The interface is enabled to detect and notify its peer device of errored frames that EFM periodically detects.

  4. Run efm error-frame-period period period

    The interval at which EFM detects errored frames on the interface is set.

  5. Run efm error-frame-period threshold threshold

    The alarm threshold for errored frames that EFM periodically detects on the interface is set.

  6. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >