Creating an Eth-Trunk Interface and Configuring It to Work in Manual Load Balancing Mode

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface eth-trunk trunk-id

   An Eth-Trunk interface is created and the Eth-Trunk interface view is displayed.

3. (Optional) Run portswitch

   The Eth-Trunk interface is switched to the Layer 2 mode.

   

   Physical interfaces can be added to an Eth-Trunk interface regardless of which mode the Eth-Trunk interface works in. If the Eth-Trunk interface needs to work in Layer 3 mode, skip this step and go to the next step.

4. Run mode manual load-balance

   The Eth-Trunk interface is configured to work in manual load balancing mode.

5. Run commit

   The configuration is committed.