Verifying the Configuration

After configuring an E-Trunk, check the configurations, including the E-Trunk priority, system ID, source IP address, peer IP address, revertive switching delay, master/backup status, dynamic BFD session parameters, and E-Trunk description.

Prerequisites

An E-Trunk has been configured.

Procedure

Run the display e-trunk etrunk-id command to check E-Trunk details.
Run the display e-trunk bfd session all command to check the bindings between dynamic BFD sessions and E-Trunks.
Add Eth-Trunk interfaces working in static LACP mode to the E-Trunk and then run the display lacp brief command to check brief LACP information.
Run the display current-configuration command to check the configuration of whitelist session-CAR for E-Trunk.

Parent Topic: Configuring an E-Trunk for Backup in a Link Aggregation Group

< Previous topic