After configuring an Eth-Trunk interface in manual 1:1
master/backup mode, verify the Eth-Trunk interface configuration, including
the Eth-Trunk ID, working mode, and member interface status.
Prerequisites
An Eth-Trunk interface in manual 1:1 master/backup mode
has been created.
Procedure
- Run the display
eth-trunk [ trunk-id [ interface interface-type interface-number ] ] command to check the configuration
of an Eth-Trunk interface in manual 1:1 master/backup mode.
- Run the display trunkmembership eth-trunk trunk-id command to check the configuration of Eth-Trunk
member interfaces.