Verifying the Configuration

After configuring the EVC model to carry L2VPN services, check the configurations.

Prerequisites

The EVC model has been configured to carry L2VPN services.

Procedure

Run the display vsi [ name vsi-name ] [ verbose ] command to check detailed VSI information.
Run the display mpls l2vc brief command to check brief VPWS connection information.

Verifying the Configuration

Run the display vsi command. The following uses the command output on PE1 as an example. The command output shows that the VSI is Up and bridge domain 10 is accessed.

Run the display mpls l2vc brief command. The command output shows that one VC has been set up and is in the Up state.